Prijava
E-news lista = info o novinama i popustima.

TP-Link TL-SG1005P PoE svič 5-port Gigabit 10/100/1000Mb/s, 4 PoE porta 802.3af do 56W (15.4W po portu), 802.1p/DSCP QoS, PoE Port Priority Function - Overload Arrangement, auto-up


Šifra proizvoda: 6890

MP Cena sa PDV: 7.390,00
Prodajna cena7.390,00
Osnovna cena6.158,33
Popust
Iznos PDV-a1.231,67

Proizvod trenutno nije u maloprodaji a dostupan je, možete ga slobodno poručiti i dobićete odmah odgovor ili pozovete 011/213 55 20 ili pošaljete email sa upitom na office@nebo.rs, office@neboits.com ili office@nebo.co.rs. Roba može biti u centralnom magacinu, na carini, nije ažurirano stanje na sajtu ili je rezervisana.
Preloader
5-Port Gigabit Desktop Switch with 4-Port PoE

• 5 10/100/1000Mbps RJ45 ports
• With four PoE ports, transfers data and power on one single cable
• Working with IEEE 802.3af compliant PDs, expands home and office network
• 802.1p/DSCP QoS enable smooth latency-sensitive traffic
• Supports PoE Power up to 15.4W for each PoE port
• Supports PoE Power up to 56W for all PoE ports
• Requires no configuration and installation

TL-SG1005P is a 5 10/100/1000Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.

Power over Ethernet
4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to ort 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).

Overload Arrangement
TL-SG1005P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 56W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Port Priority Function
Priority (Port 1=Port 2=Port 3>Port 4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 56W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 10W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 10W, no power will be supplied to Port 4.

Easy To Use
TL-SG1005P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-Link’s TL-SG1005P 5-Port Gigabit Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.
Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedIn